H2D Xtreme Tutorial

Tutorials

H2D Xtreme

1900W of drying power with five magnetic attachments and a reverse cycle self-clean. Here is what every attachment does, and how to keep your Xtreme running like the day you unboxed it.

All Tutorials / Xtreme

Watch the tutorials

StylingThe Xtreme in use

StylingStyling with the Xtreme

PairingXtreme with thermal rollers

CareHow to clean your Xtreme

Five magnetic attachments

What Each Attachment Does

Every Xtreme attachment is magnetic, so it clicks straight on and pulls straight off — no twisting, no lining anything up. Attachments get hot in use, so let them cool before you swap.

Drying

Air Concentrator

The wider of the two nozzles. Directs the airflow across a whole section, so it is the one you will have on for most of the blow-dry.

Finishing

Smoothing Nozzle

The narrow one. A thin, tightly focused stream of air for the final pass over the top layer — less flyaway, more shine, without flattening the style.

Curly hair

Diffuser

Spreads the airflow so curls and waves dry in their natural shape instead of being blown apart. Cup, hold, lift.

Curling

Left Curling Barrel

Use it on the left side of your head so the curl wraps away from your face. The airflow does the wrapping for you.

Curling

Right Curling Barrel

The mirror image of the left barrel, with the airflow reversed. Use it on the right side for curls that fall the same way.

Heat and speed. Three heat settings, three speed settings, a cool shot button and a temperature lock, all on the LCD display. Lock the temperature once you find your setting so it cannot be nudged mid blow-dry.

Attachments are not interchangeable. Xtreme attachments fit the Xtreme only — they do not fit the Pro Dynamic or the Ultra Styler.

Works with H2D Thermal Rollers. The Xtreme barrel is designed to fit inside the roller — heat the roller with the barrel, set it in the hair, then cool shot to lock the shape in. There is a video of it above.

Cleaning & care

Reverse Cycle Auto Clean

The Xtreme cleans its own filter. Lint and fine hair build up behind the filter cover and choke the airflow, which is the number one reason a dryer starts to feel slow or run hot. The whole process takes under a minute.

Leave it plugged in and switched on at the wallThe power needs to be on at the powerpoint for the clean cycle to run.
Switch the dryer itself offUse the power switch on the dryer. The dryer is off, the wall is on.
Hold the cool shot button for about 5 secondsKeep holding until the reverse cycle kicks in — you will hear it change direction.
Let it run for about 10 secondsThe airflow reverses and pushes the trapped lint back out of the filter.
Slide off the filter cover and brush it cleanTake the cover off the base of the handle and brush away the lint and fluff that has collected.
Click the cover back onMake sure it is seated properly before you use the dryer again.

How often? Once or twice a week at home, depending on how often you use it. Daily in a salon — a professional workload fills a filter fast.

Seeing E09 on the display? That is the Xtreme telling you the filter is dirty. Run the auto clean above and brush the filter cover, and the code will clear.

Never use water. Brush the filter cover dry. No water, no cleaning products, and never put any part of the dryer under a tap.

Good to know

Before You Style

1900 WattsProfessional drying power

220 / 240VNot dual voltage

Magnetic FitFive attachments

12-Month WarrantyCovers manufacturing faults

Travelling with it? The Xtreme runs on 220/240V. It works anywhere with 220/240V power, but it cannot be used in the USA or anywhere else on 110V.

No sleep mode. The Xtreme does not switch itself off. Switch it off at the wall when you have finished styling.

Shop Xtreme Shop Thermal Rollers Replacement Parts

Still Have A Question?

The Xtreme FAQ covers error codes, attachments and warranty. If you cannot find your answer there, our team is here.

Read the FAQs All Tutorials Ask Our Team

Cart 0

No more products available for purchase